Home - Shop By Part - Suspension - Lift & Leveling Kits
Click on image to zoom

BDS 1427H 4-1/2" Long Arm Suspension System | 1984 - 2001 Jeep Cherokee XJ

Suspension Lift Kit

1427H
BDS Suspension 4-1/2" Long Arm Suspension System for the 1984 - 2001 Jeep Cherokee XJ.
Important Kit Notes:
1. Measure the rear u-bolts before ordering. Some XJ's are equipped with a Dana 44 rear axle.
3. CV style rear driveshaft (not included) and slip yoke eliminator kit is required.
4. System only works with 4.0L motor and automatic transmission.
6. '96 and earlier models may require a longer emergency brake cable.
Availability: BDS DROPSHIP ONLY - BDS SUSPENSION IS REPORTING 97% STOCK AVAILABILITY. MOST PARTS AND KITS ARE SHIPPING IN 2-7 BUSINESS DAYS. SOME FOX SHOCKS AND COILOVERS ARE STILL EXPERIENCING EXTENDED DELAYS.
Shipping: MANUFACTURER DROPSHIP ITEM ONLY
Pricing: $2,663.64

Customize Your Item

- Rear Axle Selection -
 * required
- Sway Bar End Link Options -
 * required
- Shock Selection -
 * required
- Steering Stabilizer Options -
 * required
Qty:
Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)

Description

The BDS 4.5" XJ Long Arm system provides the best on and off-road capability you could ask for. By maximizing the length of both the upper and lower control arms, BDS has minimized caster change for optimum handling and minimized road forces transmitted ultimately to your seat for the best ride. To give you some idea, the lower arms are nearly bottomed out at just over 32" and the uppers at just over 28". This is about double the length of the factory control arms!

 

Although this XJ long arm system makes for a great daily driver, the true abilities of this system won' t be appreciated until you hit the rocks, dirt and mud. The 4-Link design maintains better axle control through wheel travel than any radius arm system because the upper to lower link relationship is not fixed, yet is tuned for optimum performance based on link length and operating angles. The control arm geometry is setup with the massive belly pan that incorporates the link mounts and is built to smash rocks. Believe it or not, this system is completely bolt on with no welding to the unibody required!

 

BDS Pro-Ride Coil Springs, capable of withstanding full coil bind and a tuned rate lift the front. The rear is lifted with new Glide-Ride Leaf Springs and extended greasable shackles that really let the springs flex.

 

This system also incorpoartes BDS Ultimate sway bar disconnects for quick easy access to rediculous wheel travel and stainless steel brake lines to handle it. Bump stop extension are included to limit compression and keep the tires out of the fenders on the trail. A front adjustable track bar with flex joint fits into the existing frame mount, so drilling of the taper is not required and will allow you to accurately center the front axle.

 

This system is available with both flex and standard control arm bushings, NX² series or Fox 2.0 series shocks, and many other upgrades. To check it out all of the options BDS has for your XJ, customize your kit and see what our competition is up against.

 

If you truly want to do it right the first time, install the BDS 4.5" Long Arm system and have no regrets.

 

Click on the links below to view installation articles published in the offroad magazines:

 

4.5" JP Magazine Part 1

4.5" JP Magazine Part 2

6.5" 4WD and SUV Magazine

    • Tire & Wheel Combinations
    • 32" x 11.50" w/15 x 8 and 3-1/2 to 4" back spacing

*Trimming may be required*

  • Est. Installation: 8 hours
  • Difficulty Level (easy 1 - 5 complicated): 4

Vehicle Fitment

1984 Jeep Cherokee XJ
1985 Jeep Cherokee XJ
1986 Jeep Cherokee XJ
1987 Jeep Cherokee XJ
1988 Jeep Cherokee XJ
1989 Jeep Cherokee XJ
1990 Jeep Cherokee XJ
1991 Jeep Cherokee XJ
1992 Jeep Cherokee XJ
1993 Jeep Cherokee XJ
1994 Jeep Cherokee XJ
1995 Jeep Cherokee XJ
1996 Jeep Cherokee XJ
1997 Jeep Cherokee XJ
1998 Jeep Cherokee XJ
1999 Jeep Cherokee XJ
2000 Jeep Cherokee XJ
2001 Jeep Cherokee XJ

Details

  • 1427H
  • 1427H
  • BDS Suspension
  • BDS DROPSHIP ONLY - BDS SUSPENSION IS REPORTING 97% STOCK AVAILABILITY. MOST PARTS AND KITS ARE SHIPPING IN 2-7 BUSINESS DAYS. SOME FOX SHOCKS AND COILOVERS ARE STILL EXPERIENCING EXTENDED DELAYS.
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 150.0 lbs.
  • W41.0000” x H30.0000” x L36.0000”
  • Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)
  • MANUFACTURER DROPSHIP ITEM ONLY

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.