Important Kit Notes
- 1. Special tool required to unload/load the torsion bars.
- 2. Will not fit non-HD applications.
- 3. The 2WD HD was produced with two different styles of carrier bearing crossmembers. If the carrier bearing is mounted above the crossmember, use 121611. If the carrier bearing is mounted below the crossmember, use 121612.
BDS 149H 7" lift kit for 2001-2010 Chevrolet/GMC 2500HD & 3500HD 2WD
This lift kit is based around two one-piece, 1/4" laser cut high clearance crossmembers and replacement steering knuckles. The high clearance crossmembers increase ground clearance for better looks and off road performance.
Compression struts are included with the lift kit to support the crossmembers under impact. The replacement steering knuckles ease installation as well as maintain proper steering and ball joint angles.
Optional single or dual steering stabilizers are also available for this 7" heavy duty lift kit.
- Tire & Wheel Combinations
- 35" x 12.50" w/16 x 8 and 4.5" back spacing
- 35" x 12.50 w/17 or 18 x 9 and 5.5" back spacing
- 35" x 12.50" w/20 x 9 and 5.75" back spacing
*Trimming may be required*
- Est. Installation: 8-10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
Total Reviews (0)
Write the First Review!