Home - Dodge/Ram Cummins - 2007.5-2018 Dodge 6.7L 24V Cummins - Steering And Suspension - Lift & Leveling Kits
Additional Images

BDS 632H 8" Long Arm Kit for the 2009-2013 Dodge 2500 3/4 Ton & 2009-2012 3500 1 Ton 4WD Pickup including Mega Cab

632H
BDS Suspension 8" Long Arm Kit for the 2009-2013 Dodge 2500 3/4 Ton & 2009-2012 3500 1 Ton 4WD Pickup including Mega Cab.
Important Kit Notes
1. Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require 4068.
2. Rear lift options will not fit dually applications.
3. If driveline vibration occurs, order either transfer case drop or indexing kit available in optional accessories. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA
4. 102009 Rear brake lines will not fit 2012-2013 models.
5. Additional front driveline modification may be required.
6. Exhaust modification will be required for dual rear shock kit 122009.
7. 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed
8. Will not fit Cab and Chassis models
Availability: BDS DROPSHIP ONLY - BDS SUSPENSION IS REPORTING 97% STOCK AVAILABILITY. MOST PARTS AND KITS ARE SHIPPING IN 2-7 BUSINESS DAYS. SOME FOX SHOCKS AND COILOVERS ARE STILL EXPERIENCING EXTENDED DELAYS.
Shipping: MANUFACTURER DROPSHIP ITEM ONLY
Pricing: $2,508.36

Customize Your Item

- Sway Bar Disconnect Kit -
 * required
- Steering Stabilizer Options -
 * required
- Motor Selection -
 * required
- Front Shock Selection -
 * required
- Rear Shocks -
 * required
- Driveline Adjustment Options -
 * required
- Track Bar Options -
 * required
- Add Traction Bars -
 * required
- Carrier Bearing Drop Kit -
 * required
- Front Stainless Brake Line Optio -
 * required
- Rear Stainless Brake Line -
 * required
- Traction Bar Option -
 * required
Qty:
Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)

Description

This suspension system features 8" progressive Pro-Ride Coil Springs for Diesel models and solid steel upper long arms and thick tubular lower long control arms. The long control arm reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. All four control arms are greasable for long term performance.

 

This 4-Link long arm lift kit retains the factory triangulation of the arms as well which adds to the stability of the suspension system. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket is included to properly center the axle under the vehicle. Extended bump stops and sway bar links are included to maintain the OE characteristics. The system includes a transfer case indexing ring and driveshaft spacer for use with stock front and rear driveshafts.

 

The rear of the Dodge Ram is lifted via 5" block kit.

 

A few of the many optional accessories offered with this 8" lift kit are a steering stabilizer, brake lines, traction bars, and shock options.

 

Check out the install article done by Four Wheeler Magazine.

 

    • Tire & Wheel Combinations
    • 38" x 14.0" w/17 x 9 and 4.5" back spacing

*Trimming may be required*

  • Est. Installation: 8 hours
  • Difficulty Level (easy 1 - 5 complicated): 3

Details

Shipping Information

  • Item Requires Shipping
  • 150.0 lbs.
  • W41.0000” x H30.0000” x L36.0000”
  • Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)
  • MANUFACTURER DROPSHIP ITEM ONLY

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.