Turbosmart TS-0304-1001 BOV Controller Kit with a Blue Race Port For Diesel Applications
Turbosmart BOV controller is an electronic device which controls the
pressure signal to the BOV. It works by detecting a negative voltage
change in throttle position. It then energises a solenoid to vent all of
the air out of the BOV cap, causing a pressure differential between the
piston of the BOV and the cap which will vent pressure from the intake
diesel engines with larger turbochargers can experience compressor
surge when coming off the throttle. The deceleration of the engine can
be a restriction on the outlet of the turbocharger causing compressor
surge. This can be disastrous on a turbo system which is producing high
amounts of boost. The BOV controller can vent this build up of pressure,
protecting the turbocharger. This can reduce the amount of rebuilds on
your turbocharger as well as improve acceleration between gears.
APPLICATION: Ideal for diesel engines and petrol engines.
Sensitivity: How sensitive the controller is to negative changes in throttle movement.
long the solenoid stays open to bleed out the air from the BOV (i.e how
long the BOV is open for) The solenoid will reactivate when the BOV
controller reads positive throttle movement to close the BOV and pressurize the intake system.
the solenoid energized. This can be used as a boost limiting function
as the BOV will bleed air out lowering the boost levels entering the
Disable: Disables the BOV controller and returns the intake system to its factory setting.