Important Kit Notes
- 3. Requires frame bracket modification and welding.
- 4. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
- 5. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
- 6. E-brake bracket required for factory powersteps (123018) Block kits replace factory 1-1/4" block.
- 7. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
- 8. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122405
BDS Suspension 6" Suspension Lift Kit System for 2014 Ford F150 4WD pickup trucks.
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection. The new strut spacers for the front offer easier installation without the need to disassemble the struts and maintain the OE ride quality.
The rear is lifted with a new block and includes a new offset spring plate to center the rear axle and give your 37's plenty of room.
- Tire & Wheel Combinations
- 37" x 12.50" w/18 x 9 and 5" back spacing
- 35" x 12.50" w/18 x 9 and 5" back spacing
- 20 x 9 w/37x12.50 and 5-5.5" back spacing
*Trimming may be required*
- Est. Installation: 8-10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
Total Reviews (0)
Write the First Review!