Important Kit Notes
- 1. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter.
- 2. May require exhaust modification to clear the front driveshaft at full droop.
Do You Have Y or T Style Linkage?
BDS Suspension 4" Lift Kit for the 2005 - 2007 Dodge 2500 Power Wagon.
This 4" lift kit includes front Pro-Ride Coil Springs and heavy duty, greasable upper and lower control arms. The lower arms are longer than stock to rotate the axle for proper alignment. A relocation bracket is used to flatten out the angle of the upper control arm to maintain your factory handling characteristics. All four control arms are greasable for long term performance.
A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket properly centers the axle under the vehicle. Extended bump stops, brake line relocation brackets and Powerwagon specific sway bar are also included.
The rear of the Dodge Ram is lifted via a 4" block kit or upgrade to Glide-Ride Leaf Springs to reduce axle wrap and create a more controlled and stable feel when towing.
Not only is the kit designed to last, but so is the finish. Every bracket is powder coated twice with a base grey color and then a clear coat over the top to ensure long term durability.
- Tire & Wheel Combinations
- 36" x 12.50" w/17 x 9 and 5" back spacing
*Trimming may be required*
- Est. Installation: 8 hours
- Difficulty Level (easy 1 - 5 complicated): 3
Total Reviews (0)
Write the First Review!