Important Kit Notes
- 1. Transfer case lowering kit is not required for 2WD models.
The Jeep Cherokee/Comanche was produced with two different rear axles (Chrysler 8.25 or Dana 35). You will need to measure your rear u-bolts to ensure that you get the correct new u-bolts. Basically, just measure the diameter of the axle or the I.D. of your rear u-bolts. Chrysler axles require 3" wide u-bolts and Dana 35 axles require 2-3/4" wide u-bolts. Some 1987-90 models came with a Dana 44. Measure and call BDS for proper u-bolt fitment.
This kit comes with two front Pro-Ride Coil Springs that are capable of withstanding full coil bind. The rear is lifted with a long thin add-a-leaf to add height while not creating a harsh ride.
- Tire & Wheel Combinations
- 30" x 9.50" w/15 x 7 and 3-1/2" - 4" back spacing
*Trimming may be required*
- Est. Installation: 4 hours
- Difficulty Level (easy 1 - 5 complicated): 3
Total Reviews (0)
Write the First Review!