This kit comes with two front 1-3/4" urethane coil spring spacers. The rear is lifted with a long thin add-a-leaf. The urethane spacer maintains your factory springs and factory ride.
- Tire & Wheel Combinations
- 30" x 9.50" w/15 x 7 and 3-1/2" - 4" back spacing
*Trimming may be required*
- Est. Installation: 4 hours
- Difficulty Level (easy 1 - 5 complicated): 2
Important Kit Notes
- 1. The Jeep Comanche was produced with two different rear axles (Chrysler 8.25 or Dana 35). You will need to measure your rear u-bolts to ensure that you get the correct new u-bolts. Basically, just measure the diameter of the axle or the I.D. of your rear u-bolts.
Write the First Review!