Important Kit Notes
- 1. Removal of the factory block is required.
- 2. Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
- 3. These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
- 4. If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
- 5. Although extremely rare, front driveline vibration may occur.
- 6. Front exhaust modification may be required to clear the front driveshaft on gas models.
- 7. U-bolts will not fit dually models.
- 8. Dropped pitman arm will not fit 10 lug wide track F350 models.
BDS Suspension 6" 4-Link Suspension Lift Kit for 2008-2010 Ford F250/F350 4WD pickup trucks.
This kit includes two 6" Pro-Ride Coil Springs. This full replacement four link system is centered around 4 massive control arms featuring greasable ends. The 4-link system reduces caster change through wheel travel creating a more controlled feel both on and off road. The kit also comes with a new steering stabilizer, anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension.
The rear is lifted via a 5" block kit or full replacement leaf spring options.
Choose between gas and diesel configurations, as well as plenty of upgrades and accessories when customizing your kit.
Check out the BDS 4-link system in the following magazine articles:
Four Wheeler
Four Wheel & Offroad
- Tire & Wheel Combinations
- 37" x 13.50" w/17 x 9 and 4.5" back spacing
- 37" x 13.50" w/18 x 9 and 4.5" back spacing
- 37" x 13.50" w/20 x 9 and 4.5" back spacing
*Trimming may be required*
- Est. Installation: 8 hours
- Difficulty Level (easy 1 - 5 complicated): 3
Write the First Review!