Important Kit Notes
- 1. Strut compressor required for installation.
- 2. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
- 3. E-brake bracket required for factory powersteps (123018)
- 4. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
BDS Suspension 6" Suspension Lift Kit System for 2009-2013 Ford F150 2WD pickup trucks.
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. New custom valved off road struts are supplied that are designed to handle the increased load of an oversized tire while still maintaining the OE ride quality.
The rear is lifted with a new block and includes a new offset spring plate to center the rear axle and give your 37's plenty of room.
Check out the 6" lift install article published in Four Wheeler magazine.
- Tire & Wheel Combinations
- 37" x 12.50" w/18 x 9 and 5" back spacing
- 35" x 12.50" w/18 x 9 and 4.5" back spacing
- 37" x 12.50" w/20 x 9 and 5-5.5" back spacing
*Trimming may be required*
- Est. Installation: 8-10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
Total Reviews (0)
Write the First Review!