Important Kit Notes
- 1. Removal of factory block required. Rear add a leaf is required for models equipped with factory 3-7/8" block for level to tail high stance. Single add-a-leaf kit # 113218 recommended for more level stance - Dual add-a-leaf kit # 113209 recommended for tail high stance. (Add-a-leafs do not apply to rear leaf spring equipped systems)
- 2. Front exhaust modification may be required to clear front drive shaft (gas only).
- 3. If equipped with 2-piece driveshaft, a driveshaft alignment kit may be required.
- 4. Although extremely rare, front and/or rear driveline vibration may occur.
- 5. If equipped with rear sway bar, #123009 required.
- 6. U-bolts will not work on dually.
This kit centered around two Pro-Ride Coil Springs. The box kit includes two new radius arm drop brackets to put the stock radius arm back at factory angle which will maintain your stock driving characteristics.
The kit also comes with anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension.
The rear is lifted via a 5" block kit and eliminates the factory block.
Choose between gas and diesel configurations as well as plenty of upgrades and accessories when customizing your kit..
- Tire & Wheel Combinations
- 35" x 12.50" w/17 x 9 and 4.5" back spacing
- 35" x 12.50" w/18 x 9 and 4.5" back spacing
- 35" x 12.50" w/20 x 9 and 4.5" back spacing
*Trimming may be required*
- Est. Installation: 8 hours
- Difficulty Level (easy 1 - 5 complicated): 3
Total Reviews (0)
Write the First Review!