Important Kit Notes
- 1. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter.
- 2. May require front exhaust modification to clear front driveshaft at full droop.
BDS Suspension 4" Lift Kit for the 2009-2013 Dodge 2500 Power Wagon.
This 4" lift kit includes front Pro-Ride Coil Springs and heavy duty, greasable upper and lower control arms. The lower arms are longer than stock to rotate the axle for proper alignment. A relocation bracket is used to flatten out the angle of the upper control arm to maintain your factory handling characteristics. All four control arms are greasable for long term performance.
A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket properly centers the axle under the vehicle. Extended bump stops, brake line relocation brackets and Powerwagon specific sway bar are also included.
- Tire & Wheel Combinations
- 36" x 12.50" w/17 x 9 and 5" back spacing
*Trimming may be required*
- Est. Installation: 8 hours
- Difficulty Level (easy 1 - 5 complicated): 3
Total Reviews (0)
Write the First Review!