Important Kit Notes
- 1. These trucks vary from 1"-3" tail high from the factory. Be sure to measure your vehicle before ordering. The
- 022209, 022309, and 022509 can all be substituted to achieve the desired stance.
- 2. Rack & Pinion steering system is extremely sensitive to any out of round or out of balance tire/wheel combination.
- The larger the tire the less the backspacing, the more sensitive the system, causing minor steering wheel shimmy.
- 3. Not recommended for AWD models.
- 4. Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
This 4" lift kit is based around two one-piece, 1/4" laser cut high clearance crossmembers and replacement steering knuckles. The high clearance crossmembers increase ground clearance for off road performance.
The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
The rear is lifted via BDS 2" coil spacers to level most trucks.. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 3" rear coil spring option is avaialbe depending on your desired stance.
Check out more options and build your own kit by clicking on customize this kit.
- Tire & Wheel Combinations
- 35" x 12.50" w/17 x 9 and 4-1/2" back spacing
- 35" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
- Est. Installation: 10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
Total Reviews (0)
Write the First Review!