BDS 813H 7" Lift Kit | 2007-2015 Toyota Tundra 2WD & 4WD

Important Kit Notes

• 1. Requires frame bracket modification and welding.
• 2. Strut compressor required for installation.
• 4. Stock 17", 18", and 20" wheels cannot be reinstalled.
• 5. Models with two piece rear driveline will require rear driveline modification.
• 6. Rear shackle kit can be added for 1" additional lif
• 7. ***Will work with Bilstein (yellow) factory front struts on 2014-2015 models.***
• 8. Models equipped with 6 piston calipers require modification.
• 9. Will NOT work on TRD Pro Models.

BDS Suspension 7" Lift Kit for the 2007 - 2015 Toyota Tundra 2WD & 4WD Pickups

This complete 7" IFS w/ strut mount lift kit system is not only built for daily driving, but will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.

Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install. The lift is achieved with lower strut mounts and a stuft preload spacer. Rear NX² series shock absorbers are included with Fox 2.0 series gas shocks available as an upgrade for this 7" Toyota Tundra lift kit.

Check out the install article published in Four Wheeler magazine.

• Tire & Wheel Combinations
• 35 x 12.50 w/18x9 and 5-1/2" back spacing
• 35 x 12.50 w/20x9 and 5-1/2" back spacing
• 37 x 12.50 w/20x9 and 6-1/4" back spacing

*Trimming may be required*

• Est. Installation: 8 hours
• Difficulty Level (easy 1 - 5 complicated): 3