Mag-Hytec -E4OD/4R100 Ford-Transmission Pans 1990 & up F150,F250,F350,F450,F550,F650 Trucks, Vans, and Motor homes, will fit Excursions-(but crossmember has to be moved1/4 inch.)
DESCRIPTION:
The Mag-Hytec E4OD/4R100 transmission pan is cast in A356-T6 aluminum and texture powder coated black with contrasting machined cooling fins, the Mag-Hytec trans. pan boasts increased fluid and cooling capacity, a magnetic drain plug, as well as a temperature sender port in 1/8"NPT. The drain plugs and reference plugs are MS 33649 and fitted with ARP 568 O-rings for superior sealing. All fasteners are T-303 stainless steel.
**If you are planning on installing this cover on an Excursion, you may have to grind 1/4"-1/2" of metal off the crossmember lip to get enough clearance for the pan installation. Some have had enough clearance from the factory and some had to simply loosen the crossmember bolts and re-adjust the crossmember to gain the needed clearance.**
KEY FEATURES:
- Deep high-capacity sump for maximum cooling
- Magnetic drain plug aids in trapping worn material promoting fluid integrity.
- O-rings require no gaskets or sealant
- 1/8"NPT temperature sender port
- All Mag-Hytec parts are covered by a lifetime limited warranty.
- T-303 stainless steel hardware except allen head cap screws are zinc plated
- Requires only three allen key wrenches (included) for installation and service
SPECIFICATIONS:
Capacity: 7-2/3 Quarts more than stock pan.
Overall Height: 6-1/8"
APPLICATIONS:
Ford E4OD and 4R100 Transmissions
1990-Up F150, F250, F350, F450, F550, F650 Trucks Vans and Motorhomes.
All 7.3L Powerstroke Diesels up to 2003. Will not fit Excursions.
Total Reviews (0)
Write the First Review!