Heavy Duty Onboard Air System
(P/N: 10005)
(1) 2.5 Gallon Viair Air Tank
(1) 400C model Viair Air Compressor
(1) 35ft. Coil Hose
(1) 1/4" Quick Connect Stud (F)
(1) 1/4" NPT Quick Connect Coupler (F)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay (110 PSI on, 150 PSI off)
(1) Reducer (1/8" NPT F to 1/4" NPT M)
(1) 1/4" NPT 175 PSI Safety Valve
(1) 1/4" Drain Cock
(3) 1/4" NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20ft. 12 Gauge Wire with Inline Fuse Holder
| | By
ordering a single part number, you can take all
of the guess-work out of getting all of the parts
you'll need to install one of the most
sophisticated, all-inclusive onboard air systems
available today. The Heavy Duty Onboard Air System comes
complete with a super fast 400C, 33% Duty Cycle compressor
at its heart that will fill the supplied 2.5 gallon
tank from 110-150 PSI in approximately 45
seconds. Included is everything you'll need to
add a reliable air source to your vehicle as well
as inflate tires with the included clip-on air
chuck. (For vehicles with up to 35-inch tires)
|
| 400C Tire Inflation Rates |
| | Begin/End PSI | 31" X 10.5" |
| | 0 To 30 PSI | 2 Min. 28 Sec. |
| | 15 To 30 PSI | 1 Min. 25 Sec. |
| | | |
| | Begin/End PSI | 33" X 12.5" |
| | 0 To 30 PSI | 4 Min. 00 Sec. |
| | 15 To 30 PSI | 2 Min. 00 Sec. |
| | | |
| | Begin/End PSI | 35" X 12.5" |
| | 0 To 30 PSI | 4 Min. 50 Sec. |
| | 15 To 30 PSI | 2 Min. 20 Sec. |
|
Total Reviews (0)
Write the First Review!