Home - BDS Suspension: 2019+ Ram 6.7L 24V Cummins
Click on image to zoom

BDS 8" 4-Link Suspension System | 2019+ Ram 3500 Diesel

1728H
BDS Suspension expands its listings for the late model RAM 3500 4WD diesel trucks with new 8" 4-link conversion systems.
Availability: BDS DROPSHIP ONLY - BDS SUSPENSION IS REPORTING 97% STOCK AVAILABILITY. MOST PARTS AND KITS ARE SHIPPING IN 2-7 BUSINESS DAYS. SOME FOX SHOCKS AND COILOVERS ARE STILL EXPERIENCING EXTENDED DELAYS.
Pricing: $3,180.89

Customize Your Item

- Shock Options -
 * required
- Traction Bars -
 * required
- Steering Stabilizer Options -
 * required
- Carrier Bearing Drop Kit -
 * required
- Overload Spring U-Bolt Kit -
 * required
- Track Bar Options -
 * required
- Transfer Case Indexing Ring Kit -
 * required
Qty:
Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)

Description

Designed to improve the look and performance of your new RAM, these new kits join existing 2"/3"/4"/6" lift kit options offering improved strength, capability and handling at a new taller lift height. Kits include everything necessary to correctly lift them for improved offroad capability with room for up to 40" tires while improving overall vehicle handling.

 8" 4-Link Lift Kit | Diesel

Up front these systems use a pair of 8" diesel specific progressive rate coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height, the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 Performance Series IFP gas shocks for improved ride and performance.

 

At 8" of lift it is critical to make front driveline adjustments to maintain use of 4WD due to the increased operating angle. To do this, BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output which will need to be used in combination with an aftermarket front driveshaft (not included with kit). In the rear of the RAM 3500 kits a 5" block and add-a-leaf kit along with longer u-bolt for a level-to-slightly tail high while maintaing tow capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 Performance Series IFP gas shocks. Get the look and the ride you are after with these new 8" 4-link systems from BDS Suspension.

    • Tire & Wheel Combinations
    • 40x13.50 w/17x9 and 4.5-5.5" back spacing
    • 40x13.50 w/20x9 and 4.5-5.5" back spacing

*Trimming may be required*

  • Est. Installation: 8 hours

Important Kit Notes

  • 1. Will not work with Mega Cab Models with 8-bolt Transmission (Aisin)
  • 2. Not compatible with DRW models
  • 3. Will not work with cab and chassis
  • 4. Recoil Traction bars recommended
  • 5. Designed for use on diesel models only
  • 6. Will not fit trucks with rear airbags
  • 7. Will not work with Manual T-Case
  • 8. This kit requires the use of an aftermarket front driveshaft (not provided) in addition to the (provided) indexing ring kit - BDS122624 (6-bolt) or BDS122421 (8-bolt). Both must be installed, however due to variations between truck configurations we recommend installing the kit prior to taking measurements for the aftermarket front driveshaft to ensure correct length. Vehicle can be driven without front driveshaft. Kit was tested with a Drive Line Plus flange and driveshaft, however other high angle driveshaft options can be used.

Details

  • 1728H
  • 1728H
  • BDS Suspension
  • 2022 Ram 3500
  • 2021 Ram 3500
  • 2020 Ram 3500
  • 2019 Ram 3500
  • BDS DROPSHIP ONLY - BDS SUSPENSION IS REPORTING 97% STOCK AVAILABILITY. MOST PARTS AND KITS ARE SHIPPING IN 2-7 BUSINESS DAYS. SOME FOX SHOCKS AND COILOVERS ARE STILL EXPERIENCING EXTENDED DELAYS.
  • New

Shipping Information

  • Item Requires Shipping
  • 200.0 lbs.
  • W50.0000” x H50.0000” x L50.0000”
  • Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.