Home - Return to Previous Page
Click on image to zoom

BDS Suspension 4" 4-Link Lift Kit | 2020-2022 F250/F350 Super Duty 4x4

(0) Reviews: Write first review
1567H
Important Kit Notes
1. Ford recommends replacement of the pitman arm nut after each time it has been removed.
2. If installed on a truck with a top mounted overload spring, with an overload spacer block taller than 1-1/8" UBT4027 (Qty: 4) are required.
3. Front exhaust modification may be required to clear front drive shaft (Gas Only).
4. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
5. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
6. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
7. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section.
8. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
9. Installation requires a torque wrench capable of 405 ft-lbs.
10. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.
11. Due to factory ride heights being lower on 2020 and newer model year trucks, the net lift you will gain with this kit will be 1" more than advertised. (EX. 4" kit will net 5" of lift)
Pricing: $2,088.97

Customize Your Item

- Shock Options -
 * required
- 2020+ S/D Overload Spring U-Bolt -
 * required
- BDS 2020+ S/D 4" Rear Lift Optio -
 * required
- BDS 2020+ S/D Dual Stabilizer Up -
 * required
- Add Rear Sway Bar Links -
 * required
- Track Bar Upgrade -
 * required
- Engine Selection -
 * required
- DriveShaft Alignment Kit -
 * required
- Add Traction Bars -
 * required
Qty:
Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)

Description

4" 4-Link Lift Kit

These systems upgrade the factory stamped steel radius arms to a high strength 4-link offering improved handling, stability, strength and caster control during wheel travel. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. Full length 4" ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. In the rear of these 4" systems BDS offers the your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.

    • Tire & Wheel Combinations
    • 37 x 12.50 w/17 x 9 and 4.5" - 5" back spacing
    • 37 x 12.50 w/18 x 9 and 4.5" - 5" back spacing
    • 37 x 12.50 w/20 x 9 and 4.5" - 5" back spacing

*Trimming may be required*

  • Est. Installation: 8-10 hours

 

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 300.0 lbs.
  • W48.0000” x H48.0000” x L48.0000”
  • Free Ground Shipping for orders over $150.00 to Lower 48 States (some exclusions apply)

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.