Important Kit Notes
- 1. Requires frame bracket modification and welding.
- 2. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
- 3. E-brake bracket required for factory powersteps (123018)
- 4. For a level to tail low appearance use #023415 with Kit#598H. Block kits replace factory 1-1/4" block.
- 5. Will fit EcoBoost models.
- 6. Models equipped with AWD/ Auto 4wd may require front driveshaft replacement.
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance and curb appeal.. A 1/4" thick steel differential skid plate and is included to ensure off road protection. This system uses upper front strut spacers to ease installation.
The rear is lifted with a new offset 4" rear block that replaces the factory 2" block and centers the rear axle to clear up to 35's..
Check out the similar 6" lift install article published in Four Wheeler magazine.
- Tire & Wheel Combinations
- 35" x 12.50" ** w/18 x 9 and 5" back spacing
- 35" x 12.50" ** w/20 x 9 and 4.5-5.5" back spacing
*Trimming may be required*
- Est. Installation: 8-10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
Total Reviews (0)
Write the First Review!